When milling helical cylindrical gears, what method is used to check whether the turning angle of the change gear and the workbench is correct?-Dongguan Gear Processing Factory_ Precision gears_ Small module gear_ Worm gear and worm_ Gear and rack_ Straight bevel gear_ Dongguan Gear_ Hobbing machining_ Cylindrical gear_ Gear shaft_ Gear Manufacturing Manufacturer

Keywords：Precision gears Gear and rack Worm gear and worm Timing belt wheel Straight bevel gear

—— News ——

—— Contact us ——

FAQ

Your location：Home > News > FAQ

When milling helical cylindrical gears, what method is used to check whether the turning angle of the change gear and the workbench is correct?

Publisher: Administrator Date：2023-04-26

The inspection method is to cut slightly on the gear blank after aligning the tool, and observe whether the width of the tool mark and the width of the milling cutter edge are the same. If the knife mark is flat and the width of the blade is the same, it indicates that the rotation angle of the hanging wheel and workbench is correct. Otherwise, it indicates that the rotation angle of the hanging wheel or workbench is incorrect and needs to be rechecked and corrected.

Prev：Why can I borrow the same module No. 8 gear disc milling cutter when milling straight gear racks? Which situations are the vertical displacement method and the horizontal displacement method applicable to?

Next：What are the two commonly used tool alignment methods when milling helical cylindrical gears on a universal horizontal milling machine?

[Back]